Skip to Content
Filters

Accessories
ALTO-2 telescope cover motor for GIOTTO up to 320mm
0.000 KD

ALTO-2 is the telescope cover motor we designed to let you use GIOTTO for sizes up to 320mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows computer that you choose to control it with our PLAY astrophotography software, or via a third party astronomy software using the ASCOM CoverCalibrator driver. You can also control ALTO by connecting to its WiFi network from your smartphone or tablet and use the included Virtual HandPad. The provided USB and 12V power passthrough plugs (to directly connect GIOTTO to ALTO) and the included Cable Locking Clips (CLC) allows you to improve cables management and simplify your telescope setup. ALTO natively runs off of a 12V power source to avoid the need for external power units.

Accessories
ALTO-3 telescope cover motor for GIOTTO larger than 320mm
0.000 KD

ALTO-3 is the telescope cover motor we designed to let you use GIOTTO larger than 320mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows computer that you choose to control it with our PLAY astrophotography software, or via a third party astronomy software using the ASCOM CoverCalibrator driver. You can also control ALTO by connecting to its WiFi network from your smartphone or tablet and use the included Virtual HandPad. The provided USB and 12V power passthrough plugs (to directly connect GIOTTO to ALTO) and the included Cable Locking Clips (CLC) allows you to improve cables management and simplify your telescope setup. ALTO natively runs off of a 12V power source to avoid the need for external power units.

Accessories
ALTO-3L telescope cover motor for GIOTTO 560mm
0.000 KD
ALTO-3L is the telescope cover motor we designed to let you use GIOTTO 560mm as remotely controlled motorized cap. Now you can remotely open and close your telescope allowing you to use GIOTTO to record flat calibration frames without having to be at your telescope. ALTO provides a USB-C port to connect to your EAGLE or standard Windows computer that you choose to control it with our PLAY astrophotography software, or via a third party astronomy software using the ASCOM CoverCalibrator driver. You can also control ALTO by connecting to its WiFi network from your smartphone or tablet and use the included Virtual HandPad. The provided USB and 12V power passthrough plugs (to directly connect GIOTTO to ALTO) and the included Cable Locking Clips (CLC) allows you to improve cables management and simplify your telescope setup. ALTO natively runs off of a 12V power source to avoid the need for external power units.
Cameras
ZWO ASI294MC Pro Cooled Color CMOS Astrophotography Camera
309.000 KD

ASI294MC Pro USB3.0 Cooled Color Astronomy Camera 256MB DDR3 Buffer

  • Perfect for deep space astrophotography and planetary imaging!
  • 11 MP micro four-thirds sensor.
  • High conversion gain boosts sensitivity without losing dynamic range.
  • Thermoelectric cooling down to minus 35 degrees Celsius below ambient.
  • Shoots 4k video at 24 FPS and 320 x 240 at 179.3 FPS.
Accessories
ZWO EFWmini (5 x 1.25″or 5 x 31mm)
0.000 KD

ZWO Five Position EFWmini Filter Wheel- 1.25" or 31MM

  • The smallest and most lightweight 1.25‘’Electronic Filter Wheel in the world! 300g ONLY ! Small than your hand !
  • The body is CNC machined from a full block of aircraft grade aluminium. Very thin design, 20mm ONLY
  • Supports both 5*1.25‘’ filters or 5*31mm filters The Electronic Filter wheel can be rotated in both counter clockwise or clockwise direction for filter selection.
  • Only one USB Cable is enough to power up the EFW, the max power consumption is around 120ma@5V, so you can connected it form the USB2.0 hub of our cooled cameras.
  • The distance between the filter and sensor is aroucnd 10mm when you connect it to ASI1600. So 1.25? filters won?t have vignetting up to F5 focal ratio scope and 31mm filter won?t have vigentting up to F2 lens Our new RGBL filters are recommended to work with ASI1600, it will offer nearly 1:1:1 RGB color balance.
Telescopes
Celestron AstroMaster 70AZ Telescope with Phone Adapter and Moon Filter
59.000 KD
  • 70mm refractor telescope with fully coated glass optics and a lightweight frame.
  • Observe in no time with a quick and easy, no-tool setup.
  • Accessories include: two eyepieces (20mm and 10mm), erect image star diagonal, a smartphone adapter, a moon filter, and a finderscope.
  • The smartphone adapter connects your smartphone to your telescope, so you can capture images and video through the eyepiece
  • Panning handle Alt-Az control with clutch for smooth and accurate pointing.
  • Adjustable height tripod
  • BONUS Starry Night Basic Edition Software download
Filters
Celestron Moon Filter - 1.25"
5.000 KD
  • Reduce glare and increase contrast of the Moon with the Celestron 1.25” Moon Filter
  • Also useful for extra bright planets as well as terrestrial viewing over sand or snow
  • Threads onto most 1.25” eyepieces in seconds
Accessories
Sony E-Mount T-Ring
14.000 KD
  • T-Ring attaches to E-mount Sony mirrorless camera bodies
  • Works with Celestron T-Adapters
  • 42mm female diameter thread
  • Sturdy bayonet flange locks for a secure fit


This T-Ring fits Sony E-mount mirrorless cameras only. It will not work with other Sony A-mount camera bodies without adding a Sony adapter to convert those cameras to E-mount.

Astrophotography Accessories
StellarMate Pro 4GB/64GB
159.000 KD
Observatory-class Astrophotography Controller:

    • 4x12VDC outputs, 2x Dew Heaters, and 1x Variable Voltage

    • 8 GB RAM and fast 128GB SSD

    • 4x USB 3.0 and 2x USB 2.0 ports

    • HDMI/Ethernet/GPS/WiFi with external antenna

    • Sturdy anodized CNC aluminum case

  • Pre-loaded with SM OS, no 3rd party software needed!
Services & Training
Basic Free Telescope Training
0.000 KD

Free Telescope Training Sessions at Our Store

We are excited to announce free in-store training sessions to help you get the most out of your telescope. These sessions are designed to ensure you have a seamless experience in setting up and using your telescope, whether you're a beginner or looking to enhance your skills.

Mounts
CEM40 with LiteRoc Tripod & Hard Case
844.000 KD
CEM40 Head w/ Polarscoppe / Case
CEM40 LiteRoc 1.75" Tripod w/ CW
CEM40 w/ Polarscope / Case / 1.75" Tripod

 

The iOptron® CEM40 mount is the next generation of center-balanced equatorial mounts. This mount is incredibly eye-pleasing, and its beauty is found in more than its appearance. The functionality of the mount is superb. Weighing in at only 15.8lbs., this mount can support a payload of up to 40lbs.! That's incredible!

This mount also has an integrated electronic polar finder scope known as the iPolar. This tool ensures the accurate alignment of a telescope, even when the pole star is obscured. There are large levers on the quick-lock drive engagement system; these large levers make it easy to snap the gears into place

Mounts
CEM70 with iGuider
1,070.000 KD
Following up on the success of the iOptron CEM60 center balance equatorial mount, we at iOptron are excited to introduce two new medium payload center balance mounts. The CEM70 and revolutionary CEM70G are new standard bearers for equatorial mounts in the 70lb payload segment. Both models are packed with advanced features however the CEM70G is the first of its type with an onboard optical guiding system increasing tracking accuracy while streamlining the components resulting in a more portable imaging setup.

Retaining the inherent properties of the center balance design, these relatively compact medium payload mounts deliver what astronomers expect in an efficient accurate portable mount. With precise GOTO pointing and accurate tracking (PE <±3.5 arcsec) the CEM70 is a solid performer for observers and imagers alike.

Innovative operational features such as the internal iPolar electronic polar scope, easy lock drive gear engagement (levers large enough to use with gloves), an advanced cable management system for the mount, iPolar, guider, and camera, and cumulatively assure users the CEM70 and 70G designed with their needs in mind. On top of the built-in guiding system the CEM70G also comes standard with WiFi and USB 3.0.
Accessories
Celestron Universal T-Adapter - 1.25"
19.000 KD
  • The Celestron Universal T-Adapter connects a DSLR or SLR camera to a refractor for prime focus photography
  • The adapter’s chrome barrel slides into any focuser that accepts 1.25” accessories
  • T-Threads accept camera brand specific T-Ring (sold separately)
Accessories
ESATTO 4" robotic focuser
0.000 KD
ESATTO 4" is the large dimensions robotic focuser that we designed for observatory class telescopes or for astrographs that need for large free aperture, like the Takahashi FSQ-106. Compared to the smaller models, ESATTO 4" offers a larger free aperture of 102.2mm, a longer draw tube travel of 35mm and a higher payload capacity of 10 kg, always with the incredible technical features of all the ESATTO focusers: resolution of 0.04 microns per step, USB-C port for computer control, WiFi connection with included Virtual HandPad and ARCO rotator port.
Books
موسوعة علوم الفلك و الفضاء و الفيزياء الفلكية
5.000 KD

مؤسسة الكويت للتقدم العلمي 

موسوعة علوم الفلك و الفضاء و الفيزياء الفلكية

Astrophotography Accessories
Orion GiantView ED 20x80 Waterproof Astronomy Binoculars
0.000 KD

Are you a serious amateur astronomer looking for the best and brightest wide-field images of the night sky with binoculars? The Orion 20x80 ED GiantView Binocular will fit that bill! These binoculars combine a large 80mm aperture with Extra-low Dispersion (ED) glass lenses for bright, exceptionally clear, true-color views of the night sky. Not to mention these binoculars work equally well for long distance daytime viewing. All of this in a waterproof body, with BAK-4 prisms, robust mechanical construction, and a solid pier tripod mounting system. And all these features for a very reasonable price.

You'll understand the combination of large aperture and ED lenses the first time you scan the Milky Way — pinpoint stars, with exceptional contrast against a dark background. Fully Multi-Coated surfaces provide the brightest possible images, and with 18mm of eye relief, even eyeglass wearers can view the entire field of view. And these binoculars boast a 3.2° field of view for scanning the skies, or watching distant wildlife.

The sturdy aluminum alloy body with a second hinge between the objective lenses provides a solid, well collimated mechanical system. Glare-threaded and blackened interiors provide even more contrast with less light scatter. The built-in tripod mounting bar attaches securely to a standard photographic tripod, and each binocular comes with lens caps, neck strap and a soft carry bag.

Accessories
Field Flattener for EvoGuide 50
35.000 KD
  • Corrects for field curvature, allowing the Evoguide 50ED and 50DX to be used for astrophotography
  • Thread on metal caps
  • T-thread connection or 1.25" opening for camera mounting
  • 28mm imaging circle
  • 17.5mm back focus
  • 5.33 x 3.57-degree field of view when used with APS-C crop sensor 
Books
معجم مصطلحات علم الفلك
2.000 KD

معجم شامل يغطي كافة جوانب علم الفلك

أكثر من 1000 تعريف موجزز مع إحالات مرجعية واضحة.

ما يقرب من 200 صورة فوتوغرافية ورسوم توضيحية ملونة عالية الجودة

نحو 30 جدولا يحتوي على معلومات مفيدة، و التي تشمل بيانات الكواكب التسعة الرئيسية.

و كذلك أهم كوكبات النجوم و الوبول النيزكية

Accessories
Celestron Wedge for NexStar Evolution and SE 6/8
119.000 KD
  • Equatorial wedge for Celestron NexStar 6/8SE and Evolution Alt-Az mounted computerized telescopes
  • Enables long exposure astrophotography and autoguiding by tilting the telescope’s azimuth into an equatorial platform allowing it to track an arc around the polar axis.
  • For beginner to intermediate planetary and deep space imagers
  • Captive hardware, tool-less operation, easily adjusts under load
  • Hefty yet portable design
  • Sturdy latitude adjustment screw with easy to read scale and integrated Bubble level
Services & Training
Introduction to the Night Sky with Telescope
30.000 KD

The Introduction to the Night Sky with a Telescope training is designed for new users with no prior or limited experience in operating GOTO telescopes. This is the perfect complement when puchasing a new telescope from Ikarus Technologies.

Showing 105 of 436 results
Load more