Features

• A new design, center-balanced equatorial mount (CEM) for maximum payload with natural stability
• Observatory astrophotography mount ideal for both visual and Astro-photographers
• Payload of 115 lbs (52 kg) with the mount weight of 57 lbs (26 kg)
• Easy to use and reliable gear clutches
• Precision altitude and azimuth adjustment.
• Precision stepper motor with 0.07 arcsec accuracy for precise GOTO and accurate tracking
• Polar alignment routine for those who can't see the Pole Star
• Go2Nova® 8407 V2 controller with Advanced GOTONOVA® GOTO Technology with built in heater
• High precision tracking with low periodic error (PE)<±3.5 arcsec
• Permanent periodic error correction (PPEC)
• 32-channel Global Positioning System (GPS)
• Built-in WiFi and LAN for remote operation
• Integrated ST-4 autoguiding port
• Advanced cable management system with more choices
• Spring loaded, individual adjustable Losmandy saddle

CEM40 Head w/ Polarscoppe / Case

CEM40 LiteRoc 1.75" Tripod w/ CW

CEM40 w/ Polarscope / Case / 1.75" Tripod

The iOptron® CEM40 mount is the next generation of center-balanced equatorial mounts. This mount is incredibly eye-pleasing, and its beauty is found in more than its appearance. The functionality of the mount is superb. Weighing in at only 15.8lbs., this mount can support a payload of up to 40lbs.! That's incredible!

This mount also has an integrated electronic polar finder scope known as the iPolar. This tool ensures the accurate alignment of a telescope, even when the pole star is obscured. There are large levers on the quick-lock drive engagement system; these large levers make it easy to snap the gears into place

SkyGuider^TM Pro Camera Mount Full Package

The iOptron Tri-Pier combines the strength and stableness of a pier with the levelling flexibility of a tripod. Aluminum pier and leg tops. Stainless steel leg extensions. The Tri-Pier feet has built-in vibration suspension pads.

CEM70EC w/ iPolar/WiFi/USB3

Features

• A new design, center-balanced equatorial mount (CEM) for maximum payload with natural stability
• Ideal for both visual observation and astrophotography
• Payload of 70 lbs (31.8 kg) with the mount weight of 30 lbs (13.6 kg)
• Easy to use and reliable gear clutches
• Precision altitude and azimuth adjustment.
• Precision stepper motor with 0.07 arcsec accuracy for precise GOTO and accurate tracking
• iPolar^TM electronic polar scope
• Go2Nova® 8410 controller with Advanced GOTONOVA® GOTO Technology with built in heater
• High precision tracking with low periodic error (PE <0.3 arcsec rms)
• Dual axes real time periodic error correction (RPEC)
• 32-channel Global Positioning System (GPS)
• USB3.0 powered connection
• Integrated ST-4 autoguiding port
• Advanced cable management system with more choices
• Spring loaded 8" Vixen/Losmandy dual saddle
• NEW iOptron subsidized TheSky Imaging Edition

iOptron Tripod Carry Bag (Carry Bag for 1.5-inch Tripod)

Top loading carry bag.

Perfect for carrying the tripod for SkyTracker, SmartEQ or ZEQ25 (1.5-inch tripod version). 

Durable stictched fabric with additional pockets to carry small accessories to your site. A small tripod can be top loaded into the main compartment and two outer pockets can hold the rest of your equipment. One pocket is large enough to hold your SkyTracker camera mount. The other can hold a polar scope and ball head. 

Will hold other tripods also (see dimensions). 

Inside Dimensions: Length: 28.5 inches, Diameter: 5.5 inches

Features

• Coma free, chromatic aberration-free, spherical aberration-free optics
• 150mm (6") optical aperture
• 1370mm focal length
• f/9 focal ratio
• Fixed primary
• Low thermal expansion quartz mirrors
• Multiple knife-edge baffle system
• 2" dual-speed Crayford focuser
• Finder scope base and dovetails bar
• Optional finder scope, diagonal and 1.25" eyepiece
• Optional iOptron Electric Focuser (#8451)

Package includes
#6111 6" RC OTA only

• OTA w/2" dual speed Crayford focuser
• 2X25mm, 1X 50mm focus extension
• 1.25" accessory adapter
• Vixen dovetail bar

Features

• All metal mechanical structure
• Attaches to a camera tripod with 3/8” or 1/4” threads
• Payload 11 lbs (5kg) (balanced, with DEC mounting bracket, exclude CW)
• Silent tracking for smooth camera motion, perfect for long-term exposures
• Detachable alt-azi base with fine latitude and azimuth adjusters for easy polar alignment
• Includes iOptron iPolar^TM electronic polar scope
• 4 tracking speed (1X, 1/2X, solar and lunar). 1X celestial tracking for imaging the sky and stars; 1/2X tracking speed for imaging both the starry night and the landscapes at the same time
• Operation in both northern and southern hemisphere
• Quick slew (144X) for camera framing adjustment
• Built-in rechargeable battery for up to 20 hours of operation (20°C)
• Built-in ST-4 autoguiding port
• HBX port for external hand controller
• Micro USB port for power, charging and firmware upgrade
• Built-in shutter triggering port
• Padded carry bag included
• DEC mounting bracket
• Counterweight and CW shaft
• Vixen dovetail saddle for scope mounting
• Optional ball heads available separately (#3305A)
• Optional tripod (#3221)
• Optional Go2Nova® 8408 hand controller (#8408)
• Optional DSLR camera shutter trigger cable

PACKAGE CONTENTS

• SkyGuider^TM Pro camera mount
• Alt-azi base (installed)
• iPolar^TM electronic polar scope (installed)
• USB charging cable
• Padded carry bag
• DEC mounting bracket w/ camera mounting disk
• 1.35kg counterweight
• CW shaft

iOptron 3305A SkyTracker Ball Head (Black)

• Designed for users to mount and remove camera and lens quickly.
• Large aluminum alloy ball (1.5 inches, 39mm in diameter) provides super smooth movement and super strong grip. 360 degree panning. Head Tilt: +/- 90 degrees
• The safety stops on the quick release plate prohibit your camera from accidentally slipping out of the quick release adapter (easy to remove with hex wrench if desired). Also features 3-screw-position top plate.
• Screw size: 1/4 inch for camera; 3/8 inch for tripods. Also includes 1/4"-20 / 3/8"-16 tripod adaptor piece.
• Weight: 0.875 lb. Working Height: 3.875 inch. 2 Spirit levels. Load Capacity: 20 lbs.

iOptron SkyTracker Pro Counterweight Package

• Dovetail Plate - Counterweight Bar and Safety Cap - 1.35 kg Counterweight - Locking Handle
• iOptron SkyTracker Pro Counterweight Package

mount, tripod, camera, lens, ball head are not included.

Features

• On board rechargeable lithium ion battery for up to 10 hours of use
• 33lb primary payload and 10lb secondary payload capacity, with a mount weighing only 13lbs
• Whisper quiet low-power consumption stepper motors
• Go2Nova® 8407 hand controller featuring 212K+ object library with an 8 line illuminated LCD screen
• Zero backlash driver system
• Built-in WIFI adapter for full ASCOM, iOptron Commander^TM and Sky Safari wireless control
• Serial port for computer control and firmware upgrades
• Retractable counter weight shaft
• Position memorization at power interruption
• Die-cast aluminum body
• 3-Point easy level adjustment on tripod
• 6 inch dual dovetail saddle (Losmandy/Vixen styles)
• Stands a mere 10 inches tall (mount head only)
• Built-in 32-channel GPS receiver
• Automatic position and angular detection sensors
• Aluminum Hard Case
• 1X 10lb counterweight included
• 100 ~ 240V Battery Charger included
• LiteRoc 1.75 inch heavy duty stainless steel tripod included
• includes (8954) Alt lock levers
• Two year limited warranty ( 90 day for battery)
• Optional pier/Tri-pier

Features

• German equatorial design, latitude range of 10° ~ 70°
• Ideal for both visual observation and astrophotography
• Low periodic error (< ± 10 arc seconds)
• Payload of 12.7 kg (28 lbs) with the mount-only weight of 4.5 kg (10 lbs)
• CNC machined and cast metal body
• Spring loaded gear system
• Large easy to use quick-lock gear clutches
• Stepper motor with low power consumption
• AccuAlign^TM calibrated polar scope
• Polar alignment routine for those who can’t see the Pole Star
• Go2Nova® 8409 controller with Advanced GOTONOVA® GOTO Technology
• Integrated ST-4 autoguiding port
• Built-in Wi-Fi
• USB port for firmware upgrade and computer control
• LiteRoc heavy-duty stainless steel tripod w/ vibration suppression pads (7.5kg)
• Die-cast metal tripod spreader with accessory tray
• Hard carrying case
• Optional 32-channel Global Positioning System (GPS)
• Optional iGuider^TM autoguiding system (#3360)

Tripod for iPANO/SkyGuider Pro/SkyTracker/SmartEQ/Cube

1.25" Stainless Steel tripod that fits the iOptron SkyGuider Pro, iPANO, SkyTracker/SkyTracker Pro, SmartEQ /Pro and SmartStar/Cube mount.

• Designed for SmartEQ, SkyTracker, and SkyGuider Mounts
• Height adjustable from 25" - 40"
• Weight capacity of 30 lbs
• Features include stainless steel locking leg spreaders and locking levers
• iOptron 1.25" Stainless Steel Tripod for SmartEQ & SkyTracker Mounts

Features

• German equatorial mount with innovative features
• Idea for both visual observation and astrophotography
• Maximum payload of 45 lbs (20 kg) with the mount weight of only 17.5 lbs (7.9 kg)
• Easy to use quick-lock gear clutches
• Integrated iPolar^TM electronic polar finder
• Low periodic error (< ± 7 arc seconds)
• Permanent periodic error correction (PPEC)
• Precision stepper motor for precise GOTO and accurate tracking
• Go2Nova® 8407+ controller with Advanced GOTONOVA® GOTO Technology and built-in heater
• Integrated ST-4 autoguiding port
• 32-channel Global Positioning System (GPS)
• USB communication port
• Cable management system
• 6" Losmandy-D & Vixen dual dovetail saddle
• All metal, CNC machined with red/black anodized
• Optional WiFi for mount control via SmartPhone/Tablet/Computer
• All new LiteRoc 1.75" tripod with improved stability and leg locks
• NEW iOptron subsidized TheSky Imaging Edition