Skywatcher Telescope AZ-GTI Mount PC Connect EQMOD Cable for Replacing The Hand Control Cable (6feet/180cm)

• This cable is connect PC/Laptop (usb side) to Skywater AZ-GTI mount auto Guide Specially, other device may not support . USB RJ12 Skywatcher AZ-GTI Theodolite Free hand control PC directly connected to EQMOD cableplease double check your device before buy it .
• Build in FTDI Chip inside .Support all windows version Win7/8/10/XP/, and iOS/Linux/Android.
• USB to RJ12/6P6C interface cable for Replace the hand control box cable, just one cable connect the AZ-GTI mount .
• 6feet/16feet optional . USB connect the az-gti eqmod cable .
• Package: 1 x ftdi usb to rj12/6p6c serial cable for sky-watcher AZ-GTI mount

The EQDir USB cable is designed for EQ3, EQ5, HEQ5, and EQ8 mounts. It enables control of your mount from PC, Mac, or StellarMate. Simply connect the RJ45 plug to the handset port on the mount and then connect it to your device via USB. You can use any planetarium program (e.g. KStars) to control the mount to slew to any object.

The iOptron cable is a Mount to USB cable to enable control of your mount from PC, Mac, or StellarMate. Simply connect the RJ8 plug to the RS232 port on the mount and then connect it to your device via USB.

The Celestron USB cable is compatible with all Nexstar controllers. It enables control of your mount from PC, Mac, or StellarMate. Simply connect the RJ9 plug to the RS232 port on the Nexstar handset and then connect it to your device via USB. You can use any planetarium program (e.g. KStars) to control the mount to slew to any object.